123.hp com Setup

123.hp.com/Setup Printer And Quick Configuration Methods

ittech Jun 21, 2023 0 Comments

Setting up and configuring a printer can sometimes be a daunting task, but with the help of 123.hp.com/setup Printer, the process becomes easier. 123.hp.com is the official website for HP printers where you can find all the necessary drivers, software, and instructions to set up and configure your HP printer. In this guide, we will walk you through the steps to set up and configure your HP printer using 123.hp.com.

Before starting ensure that you have these items in your possession:

  1. HP Printer: Ensure that your printer is unpacked and all the components are intact.
  2. Computer or Mobile Device: You will need a computer or mobile device with an internet connection.
  3. USB Cable or Wireless Network: Depending on your printer model, you will need either a USB cable or a wireless network connection.

Now, let's dive into the setup and configuration process using 123.hp.com:

hp printer support

Step 1: Connect the Printer Hardware

  1. Unpack the printer: Remove all the packaging materials from your HP printer.
  2. Power connection: Plug one end of the power cord into the printer's rear and the other end into an electrical outlet.
  3. Turn on the printer: Press the power button on your printer to turn it on. Wait for the printer to initialise.
Step 2: Download and Install Printer Drivers
  1. Open a web browser: Launch your preferred web browser on your computer or mobile device.
  2. Go to 123.hp.com/setup: In the address bar, enter "123.hp.com" and hit Enter. This will take you to the official HP website for printer setup.
  3. Enter your printer model: On the 123.hp.com homepage, enter your printer model (e.g., HP Officejet 3830) in the search box and click on the "Search" button.
  4. Select your printer model: From the search results, click on the appropriate printer model that matches your printer.
  5. Download drivers: On the printer's support page, you will find the necessary drivers and software for your printer. Click on the "Download" button to start the download process. Be sure to select the right operating system.
  6. Install the drivers: Once the drivers are downloaded, locate the downloaded file on your computer and double-click on it to start the installation process. Follow the on-screen directions to finish the installation.

Step 3: Choose Connection Type

  1. USB Connection: If you prefer to connect your printer to your computer using a USB cable, connect one end of the cable to the printer and the other end to an available USB port on your computer. The computer will automatically detect the printer, and the setup process will proceed.
  2. Wireless Connection: If you want to set up a wireless connection, follow these sub-steps:
  3. a. On your printer's control panel, navigate to the "Wireless" or "Network" settings.
  4. b. Choose "Wireless Setup Wizard" or another similar option. The printer will look for wireless networks that are available.
  5. c. Select your network from the list of available networks and enter the password if prompted.
  6. d. After connecting to the printer, it will show an acknowledgement message.
  7. e. On your computer or mobile device, go to the Wi-Fi settings and connect to the same network.

Step 4: Complete the Setup and Configuration

  1. Test Print: After successfully connecting your printer to the computer or wireless network, it's a good idea to print a test page to ensure that everything is functioning correctly. You can usually do this from the printer's control panel or through the printer software on your computer.
  2. Install Additional Software (Optional): Visit the 123.hp.com support page for your printer model to explore additional software and tools provided by HP. These may include scanning software

Setup With Windows:-

HP Wireless Printer Installation for Windows Using "123.hp.com/setup"

Use "123.hp.com/setup" to Install an HP Wireless Printer on Windows To install an HP wireless printer on your Windows operating system, follow the simple instructions below:

  1. Activate your printer to begin the setup
  2. Connect the HP printer to the Wi-Fi router at this point (the method was covered in the section above).
  3. The drivers for your HP printer model can then be downloaded by going to "123 hp.com/setup" page.
  4. Open the driver file you just downloaded to begin the installation procedure.
  5. Continue to follow the straightforward on-screen instructions from this point on to finish installing the driver.
  6. Additionally, once the printer driver installation is finished, adhere to the steps below to connect the printer to your PC.

From the "Control Panel" drop-down menu, choose "Devices and Printers".

After installing the driver configuration, connect the printer to your PC by following the instructions below.

  1. Select "Devices and Printers" from the "Control Panel" menu.



  2. Then select "Add Printer" from the menu.



  3. Click "Next" after choosing your HP printer from the list of available printers.
  4. Allow your HP wireless printer to connect to the PC for a short while now.



Finally, "123.hp.com setup" has finished setting up your HP wireless printer on Windows. You might also try printing a test page to see whether everything is functioning properly.

Step With Mac:-

How Can I Use "123.hp.com/setup" to Connect my HP printer to a Mac?

To connect your Mac computer to a wireless HP printer, follow the instructions listed below.

  1. Make sure the printer is switched ON first.
  2. Then, follow the instructions in the first section of this page to connect your HP printer to a wireless router
  3. From the HP website at "123.hp.com/setup" for MAC OS, get the driver for your printer.
  4. Double-click the driver to start the installation procedure after it has been downloaded.
  5. Continue to the following step for adding the printer to Mac after the installation is complete.
  6. Select "System and Preference" from the "Apple menu".



  7. Click the "Printers and Scanners" option from here.



  8. Select the "+" symbol located in the bottom left corner.



  9. Select your printer model from the next screen, then click "Add" to complete the 123 HP setup on your MAC.



Conclusion

setting up and configuring your HP printer using 123.hp.com is a straightforward process. By following the steps outlined in this guide, you can easily connect your printer hardware, download and install the necessary drivers, and choose the appropriate connection type (USB or wireless). The official HP website provides comprehensive support and resources to ensure a smooth setup experience. Remember to test your printer functionality and consider installing additional software for enhanced features. By utilising the resources available on 123.hp.com, you can efficiently set up and configure your HP printer to start printing, scanning, and enjoying all its capabilities.

Read More: How to fix HP Officejet 3830 printer offline error

Leave Comment